< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1003690837628708&ev=PageView&noscript=1" /> News - Mini Air Blower: How Long Can it Run with an Obstructed Air Inlet?
1

News

WS8045-样册图

Mini Air Blower: How Long Can it Run with an Obstructed Air Inlet?

The WS8045 blower fan is a reliable and efficient electric fan with a maximum power output of 156W and a pressure output of 15.7KPA. It is equipped with Japan's NMB bearing and is capable of delivering up to 47m³/h of air volume. This makes the WS8045 highly suitable for use in a variety of ventilation and cooling applications.

 

1.Product Introduction
Part No WS8045-24-X200
Vlotage 24VDC
At Max airflow
Speed 36,500rpm
Current 8A
Air flow 47m3/h   (27CFM)
Noise 81dba
At Max air pressure
Speed 50,000rpm
Current 3.3A
Air Pressure 15.7Kpa
Noise 81dba
Block 66dba

 

2.Product Parameters
Motor type Three Phase Brushless
Bearing type NMB Ball bearing
Insulation Class Class F
Protect Class IP54
Operating Temperature range -20℃ ~ +60℃
Life MTTF 20,000hours
Hall Sensor 120
Speed @Hall sensor frequency 1HZ=60r/min
Driver Type WS2408DY01V01-SRP008
Product Weight 270g
24V version choose 24VDC-8A power supplier

However, if the air inlet of the WS8045 becomes obstructed, it can lead to overheating of the motor and ultimately result in damage to the blower fan. When an obstruction occurs, the blower fan's speed may seem normal while still in operation, but without proper airflow to dissipate heat from the motor, it can lead to damage if left unattended for too long.

To prevent damage, it is crucial to avoid long-term obstruction of the blower fan's air inlet. In fact, it is recommended that the inlet blockage should not exceed five minutes to avoid overheating and motor damage. Failure to do so can lead to costly repairs or replacement of the blower fan.

Therefore, it is important to perform regular maintenance checks on the blower fan to ensure that the air inlet is clean and free from obstructions. This is especially important for applications where the blower fan is exposed to dust, dirt, and other debris that can accumulate over time and potentially cause blockages.

In conclusion, while the WS8045 blower fan is a powerhouse in terms of its performance and capabilities, it is important to recognize that it requires proper maintenance to prevent damage to the motor due to prolonged obstruction of its air inlet. With regular maintenance, the WS8045 can provide reliable and efficient air flow for extended periods of time.

 

Product Link:https://www.wonsmartmotor.com/efficient-24v-blower-with-nmb-ball-bearing-and-three-phase-brushless-motor-product/


Post time: Jan-20-2024